Non-Infill Football Turf for a Multi-Sport School Ground in Shenzhen
Non-Infill Football Turf for a Multi-Sport School Ground in Shenzhen
Non-Infill Football Turf for a Multi-Sport School Ground in Shenzhen
Non-Infill Football Turf for a Multi-Sport School Ground in Shenzhen
Non-Infill Football Turf for a Multi-Sport School Ground in Shenzhen
Non-Infill Football Turf for a Multi-Sport School Ground in Shenzhen

Non-Infill Football Turf for a Multi-Sport School Ground in Shenzhen

Project Overview

The campus features a single space designed to serve two distinct purposes: it can be used for soccer instruction in the morning and for basketball training after school—all without the need to worry about loose-fill materials shifting, scattering, or requiring replenishment.

Item Detail
Location Shenzhen, China
Client School campus in Shenzhen
Facility type Multi-use sports ground
Surface supplied Non-infill artificial football turf, two-tone green, with white markings woven in during manufacture
Sports hosted Football (curriculum lessons, clubs and team training) plus basketball, on the same turf
Primary drivers Timetabled daily use, no infill maintenance burden, no loose rubber on a school site

The brief: one ground, two timetables

The campus is not short of demand for sport; it is short of space. The running track loop already took the only large open area on site, and there was no realistic option to build a football pitch and a basketball court side by side. Whatever went inside that loop had to serve more than one activity.

The requirements came down to four points:

• One surface, two sports. Football lessons in curriculum time, basketball for clubs and free play — one ground hosting both, rather than a queue for a second facility.

• Timetabled durability. Classes do not reschedule for pitch recovery. The surface had to absorb back-to-back sessions, day after day, for the whole school year.

• A maintenance load the school can carry. Campus grounds teams are small. A surface that needs infill top-ups, mechanical grooming and specialist contractors was not a realistic fit.

• All-weather availability. Shenzhen's wet season should not turn PE into a classroom lesson.

Natural grass was ruled out early. On a school site it takes the worst possible combination of pressures — constant foot traffic, no closed season for renovation, an irrigation and mowing programme to fund, and mud through the rainy months. What the school needed was a surface that behaves the same on the two-hundredth day of use as it does on the first.

Heat, humidity and a short, violent rainy season

Shenzhen sits in a subtropical monsoon climate. Summers are long, humid and hot; the wet season delivers intense downpours rather than gentle rain; and typhoon-season storms can put a month's worth of water on a site in an afternoon. A school pitch here is asked to drain hard, dry out fast and hold its colour under strong ultraviolet light.

The surrounding buildings and hillside mean the surface is sheltered from wind but not from sun, so heat build-up matters as much as drainage.

Those conditions set three non-negotiables in the build-up: a base that drains rather than holds, edge restraint that keeps the surface and base where they were installed, and a turf system whose performance does not depend on loose material sitting on top of it.

Why non-infill, and not a rubber infilled system

Traditional artificial turf is a two-part product: artificial grass, plus a loose layer of sand and rubber granules brushed into it. That second part is what gives the old generation its cushioning — and what creates most of its running costs, and most of its problems on a school site.

• Granules leave the pitch. They travel on boots, in socks, into corridors and into drains. On a campus with young students, that is a daily housekeeping issue and a microplastic loss at the same time.

• Performance drifts. As infill compacts, migrates and is worn away, cushioning and ball behaviour change. The surface a class plays on in year three is not the surface that was handed over.

• It has to be topped up. Replenishing infill and mechanical grooming are recurring costs that presuppose a contractor relationship most schools would rather not have.

• Dark rubber holds heat. Black SBR granules absorb and store solar energy, which is the last thing a pitch needs in a subtropical summer.

A non-infill system removes the loose layer entirely. Support, cushioning and stability come from the construction of the turf itself — a dense pile over a texturised base layer, bonded to a stabilising backing — so the surface is a single finished product rather than a grass carpet plus a filler. The performance is set at installation and stays there.

What "non-infill" actually changes. There is no granule layer to migrate off the pitch, no infill depth to check, and no replenishment line in the maintenance budget. The trade-off is a stricter base: because nothing can be added later to correct levels, the sub-base has to be flat and draining before the turf goes down. The full comparison sits in our guide to non-infill sports artificial grass.

What UNIGRASS supplied

The playing surface is a monofilament football turf in two green tones. The white markings are woven into the turf during manufacture rather than painted on afterwards. Painted lines are a maintenance item. They fade under UV, they scuff under boots, and they need repainting on a cycle that always seems to fall in the busiest month. Woven lines are part of the carpet, so they cannot peel, flake or wear through to a bare stripe.

Yarn Monofilament polyethylene football turf, two green tones
Infill None — no silica sand, no rubber granules
Colour layout Alternating dark and light green bands across the pitch width
Markings White lines woven in during manufacture: perimeter, halfway line, centre circle, penalty areas, corner arcs
Edge detail Concrete apron and kerb separating turf from the track and surrounding paving

If you are specifying a comparable ground, the closest points in the range are UNI-MAXPRO for high-frequency club and academy use, and UNI-EC01 where the capital budget sets the ceiling. Pile height, density and backing are matched to session load. The considerations are set out in our guide to football turf specifications.

Non-Infill Football Turf for a Multi-Sport School Ground in Shenzhen

How the layout works

The football markings run the full set — perimeter, halfway line, centre circle, penalty areas, corner arcs — so the ground can host a properly marked lesson or a small-sided game without cones and improvised lines. Along the touchlines, basketball hoop units stand on the same surface. That arrangement is what makes one ground work for a full timetable. 

Safety

Non-infill artificial turf introduces a new dimension of safety. The cushioning is built into the product. It features a dense monofilament pile over a texturised base layer bonded to a stabilising backing, so the surface has give underfoot and absorbs impact when a player lands, without a loose granule layer that compacts, migrates into low spots and hardens over a season. 

• It is a surface, not a guarantee. No turf prevents injury. Non-infill artificial grass can provide consistent cushioning, no ruts, no bare hard patches, no mud, and a predictable landing.

• The base is part of the safety layer. On a non-infill system the sub-base and its flatness do work that infill does on other systems. A poorly prepared base produces a hard, uneven pitch whatever grass carpet goes on top — which is why the base stage, not the turf, decides how a pitch of this type behaves underfoot.

What the project delivers

• One ground, two sports. Football lessons and basketball practice coexist on the same surface, in the same session if the teacher wants it.

• Availability through the wet season. Standing water is not the deciding factor in whether PE happens; the surface drains and dries, and the timetable holds.

• Consistency that does not drift. Because nothing loose sits between the fibres, ball roll and underfoot feel stay where they were set at handover.

• A cleaner, cooler campus. No granules tracked into corridors, no dust from a filler layer, and no dark rubber layer storing heat on a subtropical afternoon.

• A softer, more predictable landing. Cushioning that does not compact or migrate, on a surface with no ruts, no bare hard patches and no mud — the conditions that turn a routine fall into a twisted ankle.

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.